SanDisk X300 512GB 2.5" SATA
MPN SD7SB7S-512G-1122 UPC 619659121600
- Capacity
- 512GB
- Interface
- SATA
- Form factor
- 2.5"
- Read / write
- 530 / 470 MB/s
- Endurance
- —
- NAND
- —
Best price now
$193.20
at 3rd-party seller
Near you
In stock at 0 stores nationwide.
Where to buy
Price history
Lowest in-stock price by retailer
Show as table
Specifications
Drive
- Capacity
- 512GB
- Form factor
- 2.5"
- Interface
- SATA
Performance
- Sequential read
- 530 MB/s
- Sequential write
- 470 MB/s
- Random read
- 94,000 IOPS
- Random write
- 70,000 IOPS
Wrong price, stock or spec? Tell us
Full spec sheet from Newegg
- Model/Brand
- SanDisk
- Model/Model
- SD7SB7S-512G-1122
- Model/Series
- X300
- Model/Used For
- Consumer
- Details/Capacity
- 512GB
- Performance/MTTF
- Up to 1,750,000 hours
- Details/Interface
- SATA III
- Features/Features
- Based on state of the art 1Ynm X3 flash technology, the SanDisk X300 SSD SATA SAS PCIe delivers performance with high reliability and low power. It features nCache 2.0, SanDisk's next generation tiered caching technology, designed to improve SSD responsiveness for most corporate and consumer workloads. nCache 2.0 Technology nCache 2.0 uses a combination of SLC and X3/TLC flash blocks to improve endurance, increase efficiency, and boost performance. By first writing all of the data to SLC blocks, the write amplification on the X3 blocks is minimized. DataGuard Client The X300 SSD also includes a new and robust on-the-fly error handling mechanism called DataGuard Client. It uses page-level striping with distributed parity for an added layer of data protection and can recover errors that other traditional error correction mechanisms cannot. Low Power The X300 utilizes a SATA DEVSLP low-power mode to minimize its power consumption during idle periods. DEVSLP enables the SSD to completely shut off its SATA PHY, thus resulting in much lower power consumption compared to SATA Slumber. This increases the amount of usable hours per battery charge, which is essential for modern mobile devices. TCO SanDisk SSDs can improve total cost of ownership (TCO) by reducing downtime due to hard drive failures. They also offer lower latency and greater read/write speeds over traditional HDDs6. IT departments can extend the useful life of their PC inventory by upgrading the HDDs to the X300 SSD, thus prolonging replacement cycles and maximizing asset value.
- Model/Device Type
- Internal Solid State Drive (SSD)
- Details/Form Factor
- 2.5"
- Dimensions & Weight/Depth
- 100.50mm
- Dimensions & Weight/Width
- 69.85mm
- Dimensions & Weight/Height
- 7.00mm
- Dimensions & Weight/Weight
- 55.80g
- Performance/4KB Random Read
- Up to 94,000 IOPS
- Performance/4KB Random Write
- Up to 70,000 IOPS
- Performance/Max Sequential Read
- Up to 530 MBps
- Performance/Max Sequential Write
- Up to 470 MBps
- Environmental/Storage Temperature
- -55°C ~ +85°C
- Environmental/Max Shock Resistance
- 1,500 G @0.5 msec half sine
- Environmental/Operating Temperature
- 0°C ~ +70°C
- Environmental/Max Vibration Resistance
- Operating: 5.0 gRMS, 10-2000 Hz Non-operating: 4.9 gRMS, 7-800 Hz
- Additional Information/First Listed on Newegg
- September 07, 2026
Similar SSDs
T-FORCE VULCAN Z
TEAMGROUP T-FORCE VULCAN Z 512GB 2.5" SATA
512GB · SATA · 2.5" · 540 / 470 MB/s
$76
Newegg